Zenith Light Duty Reinforcement Mending Plates 25mmX125mm WEE1125

• For supporting or bracing shelves, desks, cabinets
• 4 Pieces included in the package
• Dimensions: 25x125x2.3mm

Directions: 

• Position bracket in location to check that unit will function as intended.
• Fasten with screws provided using a No.2 Philips head insert bit at 1000rpm.
• Alternatively you can use a standard screwdriver.
• Mark holes for screws, drill pilot holes using a 2.5mm drill bit and fasten using screws provided and a Philips head screwdriver.
• Ensure that the bracket is square when fixing.

Note: 

• If bracket is being used for shelves, screw brackets into wall, then fasten shelf onto bracket.
• When brackets are to be used as an external reinforcement on timber, allowance needs to be made for the internal strengthening RIB.
• The bracket is not countersunk on the external side so raised head screws are recommended for a neat finish.
• The use of longer screws is recommended where brackets may be subject to abnormal/heavy loads.
• Screws supplied are suitable for fixing brackets to timber.
• For fixing to other surfaces, use equivalent fixings and suitable drill.
• Due to possible differences in applications, the installer must make their own evaluation of the suitability and strength of the bracket for their specific application.