SELLEYS Ready To Use Spakfilla Rapid 180g

• Selleys Spakfilla Rapid is a ready-mixed, lightweight, quick setting filler designed for both interior and exterior use.
• Product is white in colour and easily sanded.
• Suitable for Plaster, Wallboard, Wood, Plasterboard.

Features: 

• Fills cracks and holes in a single application.
• Non-cracking.
• Moisture and mould resistant.
• Pre-mixed so easy to use.
• Virtually non-shrinking.
• Only one application needed.
• Minimal sanding required.
• Very fast drying allowing sanding and painting in a short time period.
• Comes complete with a filling spatula for ease of use.
• Is water based, so can be cleaned up with water.
• Is available in a range of sizes and delivery styles.
• Paintable with oil and water based paints.

Where can this product be used?

• Filling cracks and holes on surfaces where no structural movement occurs
• Filling cracks in walls, ceilings, doors, windows
• Repairing holes in walls, ceilings, doors and windows

What materials is this product suitable for?

• Wallboard
• Wood
• Masonry
• Plaster
• Primed nail heads
• Plasterboard

Directions: 

• Ensure surfaces are clean, dry and free of loose material.
• Using the flexible spatula provided on the lid, press the filler firmly into crack/hole and smooth off surface.
• Spakfilla Rapid has minimal shrinkage so there is no need to overfill.
• Spakfilla Rapid can be sanded and painted with water-based paints once completely set (approximately 30 minutes in thin applications).
• For applications more than 2mm deep, or in cold or humid conditions, longer drying times may be required.
• For oil-based paints allow 24 hours before painting.

Handy Tips: 

• Painting with oil-based paints is not recommended until 24 hours after filler has been applied.
• Water based paints may be used immediately after filler has set.
• If filler is found to have stiffened prior to use*, stir product. If still too dry add one teaspoon of water and stir again. *Material that has actually hardened should be discarded.
• Application tools may be cleaned with water.
• Sand back to a smooth finish.
• Sanding Block as the foam sponge will follow the contours of the surface.
• Before painting, clean dust and filler particles using Selleys Sugar Soap or Selleys Super Kleen.

Clean Up: