Use this bar to show information about your cookie policy.
Roll over image to zoom inClick on image to zoom
/
Description
Cabot's Cabothane Clear Oil-Based Varnish is a clear polyurethane for doors, windows, trim and furniture.
It is a highly durable, hard-wearing varnish.
Clean up with turps.
Coverage: 16 M2/L
Finish: Gloss
Preparation:
Note: Fill nail holes, cracks and other defects with Cabot's Wood Tone Putty after applying the first coat of this product for accurate colour matching.
Remove stains, dirt, wax, grease and oil with mineral turpentine.
Remove any polish with a suitable polish remover.
Application:
Apply with a brush or spray applicator.
Note: Do not shake can.
1. Stir thoroughly with a broad flat paddle before and during use.
2. Apply with a good quality brush or spray gun. If spraying, back brushing is recommended. If brushing, always brush in the direction of the grain.
3. Allow to dry for a minimum of 6 hours then lightly sand using 240 grit paper. Remove all sanding dust.
4. Apply the 2nd & 3rd coats as above, lightly sanding with 240 grit paper between each coat.